Plastic Bearing Unit,Thermoplastic Bearing Units,Plastic Ball Bearings

The plastic bearing unit is unique in light weight, easy to install and maintenance-free, and it has the shock absorption and shock resistance performance of common cast iron bearing housing or stamped bearing seats. With the continuous development of new bearing seat materials, more and more widely used in engineering. According to different situations, plastic outer spherical bearings can be made of different materials such as POM, HDPE, PP, UPE, PTFE, etc. Relative to plastic bearing unit generally use PBT material.

The most typical varieties of fluoroplastics, PTFE and PVDF have the best corrosion resistance. Among them, PTFE is the best corrosion resistance of all known engineering plastics. It can be used in all concentrated acid and alkali situations, including HF. And fuming sulfuric acid and nitric acid (more than 98%), etc., and have good high temperature performance. PTFE has been proven to be used at high temperature of 180 ℃, PVDF can also be used at 150 ℃, but PTEF material has extremely low mechanical strength and poor dimensional stability The temperature deformation is large. Compared with PVDF, it has better comprehensive performance. Generally, the inner and outer ring materials are PTFE or PVDF, the cage material is PTFE or PVDF, and the balls are generally glass balls or ceramic balls.

PVDF, PTFE (Teflon), PPS (polyphenylene sulfide), PEEK (polyetheretherketone), PI (polyetherimide), etc. have all proven to be ideal materials for making high-temperature plastic bearings, where PI can be used at a long-term temperature of 290 It can be used under the environment of ℃, and the short-term temperature resistance can reach 350 ℃. It is the best type of high temperature performance among all known engineering plastics.

HDPE, PP, UPE materials have been proven to be used in relatively weak acid-base cross environments (30% Cucl2 solution and 30% NaoH solution test OK), so they are suitable for most acids / bases / salts / solvent / oil / gas and Seawater corrodes the environment. It has the properties of oil-free self-lubrication and anti-magnetic electrical insulation of general plastic bearings, but its mechanical strength is low and it is easy to deform. Therefore, this type of acid-proof and alkali-resistant plastic bearings is not suitable for large loads and high speeds. Disadvantages of alkaline plastic bearings. In comparison, the use of UPE material has better strength, low friction characteristics and low temperature application characteristics (minimum to -150 ℃). Generally, the inner and outer ring materials are HDPE, PP or UPE, and the cage materials are HDPE, PP or UPE, ball is glass ball, stainless steel ball or ceramic ball. In this way, the comprehensive performance of acid and alkali bearing will be greatly improved.

Characteristic:

1. Good corrosion resistance, can resist various corrosive media and organic media in a certain temperature and concentration range
2. High mechanical strength, can maintain high toughness at liquid nitrogen temperature (-196 ℃)
3. Good self-lubrication and high wear resistance
4. Strong anti-adhesion ability
5. Very low water absorption and excellent electrical insulation
6. Good resistance to high energy radiation
The main purpose:
Mechanical and electrical equipment, fitness equipment, food machinery, furniture and decorative building materials

Designation	Dimension（ mm ）												weight (kg)	Bearing Number	Housing number
Designation	D	B	S	L	J	H	H1	H2	A	N	N1	dS	weight (kg)	Bearing Number	Housing number
PLUCP201	47	31	12.7	127	95	30.2	62	14	38	13	19	M10	0.126	PLUC201	PLP201
PLUCP202	47	31	12.7	127	95	30.2	62	14	38	13	19	M10	0.126	PLUC202	PLP202
PLUCP203	47	31	12.7	127	95	30.2	62	14	38	13	19	M10	0.126	PLUC203	PLP203
PLUCP204	47	31	12.7	127	95	33.3	65	14	38	13	19	M10	0.126	PLUC204	PLP204
PLUCP205	52	34.1	14.3	140	105	36.5	71	15	38	13	19	M10	0.144	PLUC205	PLP205
PLUCP206	62	38.1	15.9	165	121	42.9	83	17	48	17	23	M14	0.233	PLUC206	PLP206
PLUCP207	72	42.9	17.5	167	127	47.6	93	18	48	17	23	M14	0.287	PLUC207	PLP207
PLUCP208	80	49.2	19	184	137	49.2	100	18	54	17	23	M14	0.341	PLUC208	PLP208
PLUCP209	85	49.2	19	190	146	54	106	20	54	17	23	M14	0.395	PLUC209	PLP209
PLUCP210	90	51.6	19	206	159	57.2	114	21	60	20	26	M16	0.467	PLUC210	PLP210
PLUCP211	100	55.6	22.2	219	171	63.5	126	23	60	20	26	M16	0.592	PLUC211	PLP211
PLUCP212	110	65.1	25.4	241	184	69.8	138	25	70	20	31	M16	0.826	PLUC212	PLP212
PLUCP213	120	65.1	25.4	265	203	76.2	151	27	70	25	31	M20	1.059	PLUC213	PLP213
PLUCP214	125	74.6	30.2	266	210	79.4	157	27	72	25	31	M20	1.185	PLUC214	PLP214
PLUCP215	130	77.8	33.3	275	217	82.6	163	28	74	25	31	M20	1.328	PLUC215	PLP215
PLUCP216	140	82.6	33.3	292	232	88.9	175	30	78	25	31	M20	1.615	PLUC216	PLP216
PLUCP217	150	85.7	34.1	310	247	95.2	187	32	83	25	33	M20	1.974	PLUC217	PLP217
PLUCP218	160	96	39.7	327	262	101.6	200	33	88	27	38	M22	2.333	PLUC218	PLP218
PLUCP220	180	108	42	380	308	115	225	40	95	30	38	M24	2.872	PLUC220	PLP220

Grid View List View

high precision plastic pillow block bearing manufacturers
Mainly produced bearing housing models: KFL000-KP007 series, UFL000-UP006 series, P200-P300-PX00 series, F200, F300,FX00 series, FL200,FL300,FLX00 series, T200, FC200,FC300 series, PH200 series, PA200 series, HA200 series, FB200 series, FA200 series, C200 series, PP200 series. Production bearing model: UC, UCX, UK, HC, SA, SB, BC, SER and other specifications with insert bearings.

Tags : thermoplastic bearing units plastic bearing unit plastic pillow block bearing

read more
high quality SS-UCPPL206 plastic pillow block bearing manufacturers
The most typical varieties of fluoroplastics, PTFE and PVDF have the best corrosion resistance

Tags : SSUCPPL206 bearing unit

read more
china hot sale SS-UCPPL205 plastic pillow block bearing suppliers
Characteristic of Plastic Bearing Unit: 1.Excellent chemical resistance, able to withstand all strong acids (including aqua regia) except molten alkali metals, fluorinated media and sodium hydroxide above 300C, as well as strong oxidants, reducing agents and various organic The role of solvents 2. Excellent heat resistance, its melting temperature is 324°C, decomposition temperature is 415°C, maximum use temperature is 250°C, embrittlement temperature is -190°C, and thermal deformation temperature (under 0.46MPa) is 120°C.

Tags : SSUCPPL205 bearing unit

read more
SSUCPPL204 thermoplastic pillow block bearing unit
The plastic bearing unit is unique in light weight, corrosion resistance, easy installation and maintenance-free. At the same time, it has the shock absorption and shock resistance performance of common cast iron bearing seats or stamped bearing Pillow block

Tags : thermoplastic pillow block bearing SSUCPPL204 bearing unit

read more
PLUCP203 thermoplastic pillow block bearing units
The plastic bearing unit is unique in light weight, corrosion resistance, easy installation and maintenance-free. At the same time, it has the shock absorption and shock resistance performance of common cast iron bearing seats or stamped bearing seats. With the continuous development of new bearing housing materials, more and more widely used in engineering. According to different situations, plastic outer spherical bearings can be made of different materials such as POM, HDPE, PP, UPE, PTFE, etc. Relative to plastic outer spherical bearings, PBT is generally used.

Tags : PLUCP203 bearing unit thermoplastic pillow block bearing units

read more
Miniature PLUCP202 plastic pillow block
1.Color Green, black, white 2. Shape (1) Square block: SF200 series (2) pillow block: SSUCP200 series (3) 2-Bolt Flange Bearing Units: SSUCFL200 series (4) Take-up bearing housing SSUCT200 series

Tags : PLUCP202 bearing unit Miniature plastic bearing

read more
miniature plastic pillow block bearings PLUCP201
Characteristic of Plastic Bearing Unit: 1.Excellent chemical resistance, able to withstand all strong acids (including aqua regia) except molten alkali metals, fluorinated media and sodium hydroxide above 300C, as well as strong oxidants, reducing agents and various organic The role of solvents 2. Excellent heat resistance, its melting temperature is 324°C,decomposition temperature is 415°C, maximum use temperature is 250°C, embrittlement temperature is -190°C, and thermal deformation temperature (under 0.46MPa) is 120°C. 3. It has the smallest surface tension in solid materials and does not adhere to any substances. 4. Low friction performance, friction coefficient is the lowest among known solid materials 5. Resistance to aging 6. Good flexibility

Tags : PLUCP201 bearing unit miniature plastic bearing

read more
thermoplastic pillow block bearing units PLUCP204
Thermoplastic pillow block bearing units PLUCP204 is unique in light weight, corrosion resistance, easy installation and maintenance-free. At the same time, it has the shock absorption and shock resistance performance of common cast iron bearing seats or stamped bearing seats. With the continuous development of new bearing housing materials, more and more widely used in engineering. According to different situations, plastic outer spherical bearings can be made of different materials such as POM, HDPE, PP, UPE, PTFE, etc. Relative to plastic outer spherical bearings, PBT is generally used.

Tags : PLUCP204 bearing unit pillow block bearing units

read more
Thermoplastic bearing units
Guanxian Fenqi Bearing Co., Ltd. produces cast iron, zinc alloy, cast steel, stainless steel, engineering plastics, stamping and other spherical bearing housing series. Supporting the production of Mounted ball bearing units, strong technical force, advanced equipment, reliable quality and complete specifications

Tags : 2-Bolt Flange Bearing Units plastic bearing units

read more

a total of

pages

Categories

New Products